Q-Bert Bootleg 1 Pinouts

        Component Side 

         

Solder Side           

GND 1 A   1 B +5V
GND 2 A   2 B +5V
GND 3 A   3 B +5V
+12V 4 A   4 B +12V
(-12V) -5V 5 A   5 B -5V (-12V)
  6 A 6 B  
AUDIO OUT (+) 7 A   7 B  
  8 A   8 B TEST MODE * See Below
  9 A   9 B SELECT SW
1P START 10 A   10 B COIN 1
2P START 11 A   11 B COIN 2
1P UP-LEFT 12 A   12 B 2P DOWN-LEFT
1P DOWN-RIGHT 13 A   13 B 2P UP-RIGHT
1P DOWN-LEFT 14 A   14 B 2P UP-LEFT
2P DOWN-RIGHT 15 A   15 B 1P UP-RIGHT
VIDEO RED 16 A   16 B VIDEO SYNC (Positive)
VIDEO BLUE 17 A   17 B  
VIDEO GREEN 18 A   18 B  
  19 A   19 B  
GND 20 A   20 B +5V
GND 21 A   21 B +5V
GND 22 A   22 B +5V
* TEST MODE SWITCH PIN 8B            
 GND FOR GAME MODE            
OPEN FOR TEST MODE            

Bootleg 1 Variation 1

Bootleg 1 Variation 2

Bootleg 1 Variation 3

Links to Dip Switches and Test mode switch (for this type of board)  click here

This type of Board is Positive Sync, so the Sync Mod needed to be Performed. Thanks to Andrew Welburn at http://www.andys-arcade.com

Andy's Q-bert Adjustable Sync Mod available here 

This Mod will work for all of these 3 variations

- The one in Andys arcade Sync Mod is Bootleg 1 -Variation 3

- The one I own and performed the sync mod on is Bootleg 1 -Variation 1

I performed this mod and it worked very well.

A Q-Bert Bootleg Jamma Adapter was purchased from http://www.andys-arcade.com also.

HQ Large Q-Bert - Blank Template here (890K)